PPG INDUSTRIES INC COATINGS & RESINS GROUP -- DTR 602WC ACRYLIC ENAMEL REDUCER (MEDIUM TEMP) -- 8010-00F005996 
=====================  Product Identification  =====================

Product ID:DTR 602WC ACRYLIC ENAMEL REDUCER (MEDIUM TEMP)
MSDS Date:01/18/1996
FSC:8010
NIIN:00F005996
=== Responsible Party ===
Company Name:PPG INDUSTRIES INC COATINGS & RESINS GROUP
Address:4325 ROSANNA DR
Box:9
City:ALLISON PARK
State:PA
ZIP:15101-5000
Country:US
Info Phone Num:412-492-5555/216-572-6111
Emergency Phone Num:304-843-1300/412-492-5555
CAGE:DO542
=== Contractor Identification ===
Company Name:PPG INDUSTRIES INC. COATINGS & RESINS GP
Address:4325 ROSEANNA DR PO BOX 9
Box:9
City:ALLISON PARK
State:PA
ZIP:15101
Phone:412-492-5555
CAGE:DO542

=============  Composition/Information on Ingredients  =============

Ingred Name:PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,
    1-METHOXY-2-PROPANOL ACETATE
CAS:108-65-6
RTECS #:AI8925000
Fraction by Wt: 2-5%

Ingred Name:LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA, LACOLENE
CAS:64742-89-8
Fraction by Wt: 25-30%
OSHA PEL:300 PPM
ACGIH TLV:300 PPM

Ingred Name:STODDARD SOLVENT (PETROLEUM DISTILLATE), MINERAL SPIRITS
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 10-15%
Other REC Limits:525 MG/CUM
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Ingred Name:ETHYLENE GLYCOL MONOBUTYL ETHER ACETATE, BUTYL CELLOSOLVE
    ACETATE, 2-BUTOXYETHYL ACETATE * 95-4 *
CAS:112-07-2
RTECS #:KJ8925000
Fraction by Wt: 10-15%
OSHA PEL:50 PPM
ACGIH TLV:25 PPM

Ingred Name:HEAVY AROMATIC SOLVENT NAPHTHA PETROLEUM  *95-4*
CAS:64742-94-5
RTECS #:WF3100000
Fraction by Wt: 2-5%

Ingred Name:GLYCOL ETHERS
Fraction by Wt: 10-15%

Ingred Name:TOLUENE (IARC CARC- GROUP 3)     *95-4*
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 15-20%
Other REC Limits:375 MG/CUM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:ACETONE; DIMETHYL KETONE; 2-PROPANONE
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 15-20%
OSHA PEL:2400 MG/CUM
ACGIH TLV:750 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL/FATAL. EYES:
    IRRITATION. SKIN: MODERATE IRRITATION & MAY BE ABSORBED.
    INHALATION: VAPOR & SPRAY MIST MAY BE HARMFUL. MAY IRRITATE EYES,
    NOSE & THROAT. MAY CAUSE IRRITATION OF THE RE SPIRATORY SYSTEM &
    PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYE WATERING, HEADACHES, NAUSEA, DIZZINES, LOSS
    OF COORDINATION, REDNESS, ITCHING, BURNING SENSATION, VISUAL
    DISTURBANCES, DRYNESS, CRACKING, BURNING, SWELLING, IRRITATION.

=======================  First Aid Measures  =======================

First Aid:INGESTION: GIVE 1/2 GLASSES OF WATER, BUT DON'T INDUCE
    VOMITING. EYES: FLUSH IMMEDIATELY W/PLENTY OF WATER FOR 15 MINS.
    SKIN: FLUSH IMMEDIATELY W/PLENTY OF WATER FOLLOWED BY WASHING
    W/SOAP & WATER. IN HALATION: REMOVE TO FRESH AIR. GIVE CPR& OTHER
    SUPPORTIVE MEASURES AS REQUIRED. OBTAIN MEDICAL ATTENTION IN ALL
    CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:10F
Lower Limits:1.7
Extinguishing Media:CO2, DRY CHEMICAL/UNIVERSAL AQUEOUS FILM FORMING
    FOAM.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY
    MAY BE USED TO COOL CLOSED CONTAINERS. IF WATER IS USED, FOG
    NOZZLES ARE PREFERABLE. WEAR SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT. DON'T APPLY ON HOT SURFACES, TOXIC GASES
    MAY FORM WHEN CONTACTED BY FLAME/HOT SURFACES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
    EQUIPPED W/PROPER PROTECTIVE EQUIPMENT SHOULD BE PERMITTED IN AREA.
    REMOVE SOURCES OF IGNITION. TAKE UP MATERIAL
    W/SAND/VERMICULITE/OTHER ABSORBENT MATERIAL  & PLACE IN CLEAN,
    EMPTY CONTAINERS FORDISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
    QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
    CLASS B FLAMMABLE LIQUIDS.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID
    FREE FALL OF LIQUIDS IN EXCESS OF A FEW INCHES. KEEP CONTAINERS
    TIGHTLY CLOSED. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING &
    INHALING THE CONTEN TS CAN BE HARMFUL/FATAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:VAPORS MAY BE PREVENTED BY ENSURING VENTILATION
    CONTROLS, VAPOR EXHAUST/FRESH AIR ENTRY. USE NIOSH/MSHA
    APPROVED(TC-23C)AIR PURIFYING/AIR SUPPLIED(TC-19C)RESPIRATORS MAY
    ALSO REDUCE EXPOSURE.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST TO KEEP CONCENTRATIONS <
    EXPOSURE LIMIT & LEL.
Protective Gloves:NITRILE/NEOPRENE RUBBER
Eye Protection:CHEMICAL SPLASH GOGGLES/FULL FACE SHIELD
Other Protective Equipment:PROTECTIVE CLOTHING, IMPERMEABLE APRON.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINTATED CLOTHING & SHOES
    BEFORE REUSE. DISCARD CONTAMINATED CLOTHING, SHOES/GLOVES.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:132.8-410F
Vapor Pres:78.2
Vapor Density:>1
Spec Gravity:0.8
Evaporation Rate & Reference:(BUO AC = 100): 353
Solubility in Water:20.8%
Appearance and Odor:NON-VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF
    SOLVENTS
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, ELECTRICAL EQUIPMENT, SPARKS, OPEN
    FLAMES, HOT SURFACES & OTHER IGNITION SOURCES.
Hazardous Decomposition Products:WHEN HEATED, CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
    THROUGH AN APPROVED WASTE MANAGEMENT FACILITY, IAW/FEDERAL, STATE &
    LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.