INDUSTRIAL FLOOR FINISHES -- METAL POLISH  -- 7930-00-266-7137
<pre>=====================  Product Identification  =====================

Product ID:METAL POLISH
MSDS Date:05/01/1987
FSC:7930
NIIN:00-266-7137
=== Responsible Party ===
Company Name:INDUSTRIAL FLOOR FINISHES
Address:605 SPRING STREET
City:BEDFORD
State:MA
ZIP:01730
Country:US
Emergency Phone Num:617-667-5161 OR LOCAL POISON CENTER
Preparer's Name:T. PITROLFFY
CAGE:INDUS
=== Contractor Identification ===
Company Name:INDUSTRIAL FLOOR FINISHES
Address:605 SPRINGS RD
City:BEDFORD
State:MA
ZIP:01730
Country:US
Phone:1-617-667-5161
CAGE:INDUS
Company Name:PEMATEX INDUSTRIAL CORPORATION
Address:30 TOWER LANE, AVON PARK SOUTH
Box:City:AVON
State:CT
ZIP:06001
CAGE:PERMA

=============  Composition/Information on Ingredients  =============

Ingred Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 17%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:PRIMARY EYE & SKIN IRRITANT WITH
    CONTACT. INHALATION: MAY CAUSE HEADACHE, DIZZINESS & NAUSEA.
    CHRONIC: NOT SUFFICIENT DATA, EXERCISE CARE, DO NOT USE ABOVE TLV
Effects of Overexposure:PRIMARY EYE & SKIN IRRITANT WITH CONTACT.
    INHALATION: MAY CAUSE HEADACHE, DIZZINESS & NAUSEA. CHRONIC: NOT
    SUFFICIENT DATA, EXERCISE CARE, DO NOT USE ABOVE TLV

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH WATER. SKIN: WASH WITH SOAP & WATER, APPLY
    SKIN CREAM. INHALATION: REMOVE TO FRESH AIR, RESTORE BREATHING,
    CALL PHYSICIAN. AND INGESTION: DRINKWATER OR MILK, DO NOT INDUCE
    VOMITING. C ALL POISON CONTROL.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:MIN 104 F 40.00C
Lower Limits:0.8
Upper Limits:6.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:WATER MAY BE USED TO COOL CONTAINERS TO
    PREVENT PRESSURE BUILD-UP OR AUTO-IGNITION
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT, CLOSED CONTAINERS MAY
    EXPLODE IF EXPOSED TO EXTREME HEAT

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE SOURCES OF IGNITION, SPRINKLE WITH
    ABSORBENT. FOG WITH WATER FLUSH/SCRAPE INTO RETAINING AREAOR
    CONTAINER. INCREASE VENTILATION. AVOID BREATH- ING VAPORS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND OPEN
    FLAME. USE ADEQUATE VENTILATION AVOID PROLONGED OR REPEATED
    CONTACT. KEEP CONTAINER CLOSED.
Other Precautions:AVOID STATIC BUILD-UP. KEEP AWAY FROM CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:SELF CONTAINED BREATHING APPARATUS FOR
    CONCENTRATIONS ABOVE TLV
Ventilation:LOCAL EXHAUST, MECHANICAL EXHAUST FROM LOWER LEVELS
Protective Gloves:USE RUBBER GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE BATH, SAFETY SHOWER, AND PROTECTIVE
    CREAM
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:215
Vapor Pres:2
Vapor Density:2.8
Spec Gravity:1.1
Evaporation Rate &amp; Reference:0.8
Solubility in Water:PARTIAL
Appearance and Odor:PINK CREAMY LIQUID, AMMONIA ODOR
Percent Volatiles by Volume:74

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME AND FIRE
Hazardous Decomposition Products:THERMAL DECOMPOSTION PRODUCES FUMES
    THAT MAY YIELD CARBON   MONOXIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE OR DISPOSE OF IN ACCORDANCE WITH
    LOCAL,STATE AND FEDERAL REGULATIONS. EMPTY CONTAINERS   MAY RETAIN
    FUMES. DO NOT EXPOSE TO HEAT OR FLAME

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.