MICRO ENGINEERING II -- METAL CONDITIONER -- 6850-00F004092
===================== Product Identification =====================
Product ID:METAL CONDITIONER
MSDS Date:01/01/1987
FSC:6850
NIIN:00F004092
=== Responsible Party ===
Company Name:MICRO ENGINEERING II/UPLAND, CA 91786
Emergency Phone Num:(714) 946-2110
CAGE:0AN59
=== Contractor Identification ===
Company Name:MICRO ENGINEERING II/UPLAND, CA 91786
CAGE:0AN59
============= Composition/Information on Ingredients =============
Ingred Name:PHOSPHORIC ACID (SARA III)
CAS:7664-38-2
RTECS #:TB6300000
Fraction by Wt: 4%
OSHA PEL:1 MG/M3/3 STEL
ACGIH TLV:1 MG/M3/3 STEL; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Ingred Name:GLYCOL ETHERS
CAS:111-46-6
RTECS #:ID5950000
Fraction by Wt: 3%
Ingred Name:SURFACE ACTIVE AGENT
Fraction by Wt: 1%
===================== Hazards Identification =====================
Effects of Overexposure:PROLONGED INHALATION MAY CAUSE TOXIC
EFFECTS/INJURY TO MUCOUS MEMBRANES AND RESPIRATORY TRACT.
======================= First Aid Measures =======================
First Aid:SKIN CONTACT: WASH THOROUGHLY WITH SOAP AND WATER. EYE
CONTACT: FLUSH WITH LARGE AMOUNTS OF WATER IMMEDIATELY AND CALL A
DOCTOR. INGESTION: TREAT AS FOR CORROSIVE ACIDS.
===================== Fire Fighting Measures =====================
Flash Point:NON-FLAMMABLE
================== Accidental Release Measures ==================
Spill Release Procedures:TRANSFER TO A CLEAN GLASS OR PLASTIC
CONTAINER. FLUSH AWAY ANY RESIDUALS WITH PLENTYF WATER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL, DRY, AREA.
============= Exposure Controls/Personal Protection =============
Ventilation:LOCAL EXHAUST
Protective Gloves:RUBBER
Eye Protection:GOGLES
Other Protective Equipment:APRON
Supplemental Safety and Health
MSDS DATE: MAY 1972.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:212F
Spec Gravity:1.06
Solubility in Water:100%
Appearance and Odor:VINEGAR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ALKALINE MATERIALS
==================== Disposal Considerations ====================
Waste Disposal Methods:NEUTRALIZE WITH A DILUTE ALKALINE SOLUTION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.