SAF-T-LOK CHEMICAL CORPORATION -- PRIMER N  -- 8030-00-980-3975
<pre>=====================  Product Identification  =====================

Product ID:PRIMER N
MSDS Date:01/02/1991
FSC:8030
NIIN:00-980-3975
=== Responsible Party ===
Company Name:SAF-T-LOK CHEMICAL CORPORATION
Address:300 EISENHOWER LANE NORTH
City:LOMBARD
State:IL
ZIP:60148
Country:US
Info Phone Num:708-971-2001
Emergency Phone Num:708-971-2001
CAGE:SAFTL
=== Contractor Identification ===
Company Name:SAF-T-LOK CHEMICAL CORPORATION
Address:300 EISENHOWER LANE NORTH
City:LOMBARD
State:IL
ZIP:60148
Country:US
Phone:708-971-2001
CAGE:SAFTL

=============  Composition/Information on Ingredients  =============

Ingred Name:METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE)  (SARA III)
CAS:71-55-6
RTECS #:KJ2975000
Fraction by Wt: 91%
Other REC Limits:NONE SPECIFIED
OSHA PEL:350 PPM/450 STEL
ACGIH TLV:350 PPM/450STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ozone Depleting Chemical:1

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:EXCESSIVE INHALATION OF VAPORS CAN
    CAUSE NASAL AND RESPIRATORY IRRITATION.
Effects of Overexposure:INHALATION: DIZZINESS, WEAKNESS, NAUSEA,
    HEADACHE, POSSIBLY UNCONSCIOUSNESS. CONTACT WITH EYES: CAN CAUSE
    SEVERE IRRITATION, REDNESS, TEARING, BLURRED VISION. SKIN:
    PROLONGED OR REPEATED CONTACT CAN C AUSE IRRITATION & DERMATITIS.
    INGESTION: GASTROINTESTINAL IRRITATION, NAUSEA & VOMITING.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR, IF BREATHING HAS STOPPED,
    GIVE ARTIFICIAL RESPIRATION & GET MEDICAL ATTENTION. DO NOT GIVE
    STIMULANTS. EYE CONTACT: FLUSH WITH WATER, SEE PHYSICIAN.
    INGESTION: DO NOT  INDUCE VOMITING, CALL PHYSICIAN. SKIN CONTACT:
    WASH WITH SOAP AND WATER.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:>212F,>100C
Extinguishing Media:CO2, FOAM, DRY CHEMICALS.
Fire Fighting Procedures:WATER MAY BE USED TO KEEP FIRE EXPOSED
    CONTAINERS COOL UNTIL FIRE IS OUT. USE AIR SUPPLIED MASK AND
    PROCEDURE FOR CHEMICAL FIRES.
Unusual Fire/Explosion Hazard:NEVER USE WELDING OR CUTTING TORCH ON
    CONTAINER, BECAUSE PRODUCT CAN IGNITE. ON BURNING, PRODUCT GIVES
    OFF HYDROGEN CHLORIDE & TRACES OF PHOSGENE AND CHLORINE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE ADEQUATE VENTILATION. SOAK UP WITH
    SAND, CLAY, EARTH OR OTHER ABSORBENT MATERIAL AND SHOVEL INTO
    CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT USE IN POORLY VENTILATED OR
    CONFINED SPACES. KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE.
    STORE IN A COOL PLACE AWAY FROM HEAT & FLAME.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF TLV IS EXCEEDED, AN APPROVED AIR SUPPLIED
    RESPIRATOR IS ADVISED.
Ventilation:USE LOCAL EXHAUST & MECHANICAL IF NEEDED.
Protective Gloves:POLYETHYLENE OR POLYVINYL ALCOHOL.
Eye Protection:SAFETY GLASSES OR FACE SHIELD.
Other Protective Equipment:EYE WASH FOUNTAIN.
Supplemental Safety and Health
AVOID PROLONGED BREATHING OF VAPORS OR CONTACT WITH EYES.

==================  Physical/Chemical Properties  ==================

HCC:T4
Boiling Pt:B.P. Text:165F,74C
Vapor Pres:100 @ 68 F
Vapor Density:4.5
Spec Gravity:>1
Evaporation Rate &amp; Reference:><.4
Solubility in Water:INSOLUBLE
Appearance and Odor:GREEN LIQUID

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH WATER, REACTIVE METALS AND CAUSTIC SODA.
Stability Condition to Avoid:OPEN FLAMES, WELDING ARCS, RESISTANCE
    HEATERS.
Hazardous Decomposition Products:THERMAL DECOMPOSITION RELEASES
    HYDROGEN CHLORIDE & SMALL AMOUNTS OF PHOSGENE & CHLORINE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONTAMINATED ABSORBENT MAY BE DEPOSITED IN A
    LANDFILL IN ACCORDANCE WITH LOCAL, STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.