TERAND INDUSTRIES INC -- SILICONE MOLD RELEASE  -- 6850-00N057284
<pre>=====================  Product Identification  =====================

Product ID:SILICONE MOLD RELEASE
MSDS Date:09/12/1990
FSC:6850
NIIN:00N057284
=== Responsible Party ===
Company Name:TERAND INDUSTRIES INC
Box:9947
City:FT LAUDERDALE
State:FL
ZIP:33310
Country:US
Info Phone Num:305-974-5440
Emergency Phone Num:305-974-5440
CAGE:OO296
=== Contractor Identification ===
Company Name:TERAND INDUSTRIES, INC.
Box:9947
City:FT. LAUNDERDALE
State:FL
ZIP:33310
Phone:305-974-5440
CAGE:OO296

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHANE, 1,1,2-TRICHLORO-1,2,2-TRIFLUORO-;
    (TRICHLOROTRIFLUOROETHANE) (SARA 313)
CAS:76-13-1
RTECS #:KJ4000000
Fraction by Wt: 68%
OSHA PEL:1000 PPM
ACGIH TLV:1000PPM; 1250 STEL
Ozone Depleting Chemical:1

Ingred Name:METHANE, CHLORODIFLUORO-; (CHLORODIFLUOROMETHANE)
    (PROPELLANT) (SARA 313) (CERCLA)
CAS:75-45-6
RTECS #:PA6390000
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM
Ozone Depleting Chemical:2

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:CHLOROFLUOROCARBON (CFC) MATLS HAVE
    PRDCD SENSIT OF MYOCARDIUM TO EPINEPHRINE IN LAB ANIMALS & COULD
    HAVE SIMILAR EFT IN HUMANS. ADRENOMIMETICS (IE, EPINEPHRINE) MAY BE
    CONTRA-INDICATED EXCEPT FOR LIF E-SUSTAINING USES IN HUMANS
    ACUTELY/CHRONICALLY EXPOSED TO CFCS . INHAL: MINIMAL EFTS BELOW
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: 1000 PPM; DIZZ, DROW & THROAT IRRIT
    AT LEVELS ABOVE 1000 PPM. UNCON & DEATH POSS AT LEVELS ABOVE 10,000
    PPM. BLOOD PRESS DEPRESS, CARD SENSIT, VENTRICULAR ARRHYTHMIA CAN
    RSLT FROM EXPOS TO N EAR ANESTH LEVELS. SKIN: PRLNG/RPTD CNTCT CAN
    CAUSE MOD IRRIT, DEFAT & DERM. INGEST: CAN CAUSE GI IRRIT, NAUS,
    (SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH EYES W/WATER, LIFTING UPPER & LOWER LIDS. GET
    MEDICAL ATTENTION. SKIN: WASH EXPOSED AREAS W/SOAP & WATER. INHAL:
    REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT, ADMINISTER OXYGEN.
    IF BREAT HING STOPS GIVE ARTIFICIAL RESPIRATION.GET MEDICAL
    ATTENTION. INGEST: DO NOT INDUCE VOMITING. GET MEDICAL ATTENTION.
    ASPIRATION OF MATERIAL INTO LUNGS DUE TO VOMITING CAN CAUSE
    CHEMICAL PNEUMONITIS.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:110F,43C
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD PRESS DEMAND SCBA &
    FULL PROT EQUIP . KEEP CNTNRS COOL. USE EQUIP/SHIELDING REQD TO
    PROT PERS AGAINST BURST/RUPTURE/VENT CNTNRS.
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION PRODUCTS MAY
    INCLUDE FLUORIDES, CHLORIDES & PHOSGENE  . AT ELEVATED TEMPERATURES
    (ABOVE 120F) CONTAINERS MAY VENT/RUPTURE/BURST.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP AREA BY MOPPING OR WITH ABSORBENT
    MATERIALS AND PLACE IN CLOSED CONTAINERS FOR DISPOSAL. CONTACT
    FEDERAL, STATE OR LOCAL AUTHORITIES FOR APPROVED DISPOSAL
    PROCEDURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE AT TEMPERATURES ABOVE
    120F.
Other Precautions:NO SMKNG IN AREA OF USE. DO NOT USE IN GEN VICIN OF
    ARC WELDING, OPEN FLAMES OR HOT SURFS. HEAT &/OR UV RADIA MAY CAUSE
    FORM OF CHLORIDES, FLUORIDES OR PHOSGENE . PLEASE READ & FOLLOW
    DIRECTIONS	ON PROD LABEL; THEY ARE BEST (SUPDAT)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC TYPE RESPIRATOR
    ACCEPTABLE IF CONCENTRATION IS 350-1000 PPM.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL) &/OR LOCAL EXHAUST
    VENTILATION TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:NEOPRENE/NITRILE RUB/POLYVINYL CHLORIDE.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMER EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:DO NOT EAT, DRINK OR SMOKE IN WORK AREA. WASH
    HANDS BEFORE EATING.
Supplemental Safety and Health
EFTS OF OVEREXP: VOMIT & DIARR. ASPIR OF MATL INTO LUNGS CAN CAUSE CHEM
    PNEUM. EYES: CAN CAUSE SEV IRRIT, REDNESS, TEARING & BLURRED
    VISION. OTHER PREC: GUIDE TO USING PROD IN MOST EFTIVE WAY & THEY A
    LSO GIVE NECESSARY SFTY PRECS TO PROT HEALTH.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:110F,43C
Vapor Pres:79 @ 75F
Spec Gravity:1.550 (H*2O=1)
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR LIQID; MILD SOLVENT ODOR.
Percent Volatiles by Volume:97

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ALKALI METALS, ALKALINE EARTH METALS, POWDERED ALUMINUM, ZINC,
    BERYLIUM, ETC.
Stability Condition to Avoid:DO NOT EXPOSE TO TEMPERATURES ABOVE 120F.
Hazardous Decomposition Products:CHLORIDES, FLUORIDES & PHOSGENE .

====================  Disposal Considerations  ====================

Waste Disposal Methods:WHEN USED PROPERLY AEROSOL PRODS DO NOT GENERATE
    HAZ WASTE. EMPTY DEPRESSURIZED CNTNRS CANNOT BE REUSED & SHOULD BE
    WRAPPED & PUT IN A PERMITTED WASTE MANAGEMENT FACILITY. CONSULT
    FEDERAL, STATE & LOC AL DISPOSAL AUTHORITIES FOR APPROVED
    PROCEDURES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.