GO-JO INDUSTRIES, INC -- FIBERGLASS RESIN -- 8030-00F003864
===================== Product Identification =====================
Product ID:FIBERGLASS RESIN
MSDS Date:01/01/1987
FSC:8030
NIIN:00F003864
=== Responsible Party ===
Company Name:GO-JO INDUSTRIES, INC/AKRON, OHIO 44309
Emergency Phone Num:(216) 920-8100
CAGE:02905
=== Contractor Identification ===
Company Name:GOJO INDUSTRIES, INC.
Box:991
City:AKRON
State:OH
ZIP:44309-0991
Country:US
Phone:330-920-8100 EXT 352
CAGE:02905
============= Composition/Information on Ingredients =============
Ingred Name:STYRENE, MONOMER (SARA III)
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: <40%
OSHA PEL:100 PPM
ACGIH TLV:S,50PPM/100STEL;9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ingred Name:XYLIDINE
CAS:1300-73-8
RTECS #:ZE8575000
Fraction by Wt: .1%
OSHA PEL:S, 5 PPM
ACGIH TLV:S, 0.5 PPM; A2; 9293
===================== Hazards Identification =====================
Effects of Overexposure:VAPORS MAY IRRITATE EYES/NOSE/THROAT. MAY CAUSE
HEADACHE/NAUSEA/VOMITING. MINOR SKIN IRRITATION.
======================= First Aid Measures =======================
First Aid:REMOVE TO FRESH AIR. FLUSH AFFECTED AREAS WITH ACETONE, THEN
PLENTY OF SOAP AND WATER. SEE PHYSICIAN IN SEVERE CASES. FLUSH EYES
WITH WATER FOR 15 MINUTES.
===================== Fire Fighting Measures =====================
Flash Point:98F (TOC)
Extinguishing Media:FOAM, CO2, POWDERED CHEMICAL
Fire Fighting Procedures:NONE-DENSE SMOKE LIMITS VISIBILITY.
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:COVER WITH SAND OR ABSORBENT MATERIAL. AVOID
FLAME SOURCE IN SPILL AREA.
====================== Handling and Storage ======================
Handling and Storage Precautions:LABEL-FLAMMABLE HAZARD CODE.
Other Precautions:AVOID SPARKS AND FIRE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT REQUIRED WITH ADEQUATE VENTILATION.
Ventilation:LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:GOGGLES
Other Protective Equipment:NONE
Supplemental Safety and Health
MSDS DATED: 1 NOV 1985.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:295F
Vapor Pres:7
Vapor Density:>3.6
Spec Gravity:1.12
Evaporation Rate & Reference:4.9
Solubility in Water:NONE
Appearance and Odor:AMBER LIQUID WITH STYRENE ODOR.
Percent Volatiles by Volume:35%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
ORGANIC PEROXIDES AND STRONG ACIDS
Stability Condition to Avoid:EXCESSIVE HEAT, SPARKS AND FLAME.
Conditions to Avoid Polymerization:ORGANIC PEROXIDES, STRONG ACIDS AND
HIGH TEMPERATUR ES
==================== Disposal Considerations ====================
Waste Disposal Methods:BURN OR BURY IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.